RS1,615.00
Automatic DP Box Fire Extinguisher – Intelligent Instant Fire Protection System
The Automatic DP Box Fire Extinguisher is an advanced self-activating fire suppression safety device specially engineered for electrical distribution panels, DP boxes, breaker panels, control cabinets, meter boxes, inverter boxes, solar DBs, and industrial electrical enclosures.
Electrical short circuits, overloaded wiring, loose terminals, sparking breakers, and overheated components can generate fire within seconds. In most cases, these fires begin inside the closed electrical box, making them difficult to detect and almost impossible to extinguish manually in time.
This innovative automatic extinguisher solves that problem by providing 24/7 unattended fire monitoring and immediate suppression directly at the fire source.
When internal temperature rises abnormally and flames come in contact with...
the extinguisher unit, the device automatically bursts within seconds and releases high-pressure Carbon Dioxide (CO2) gas throughout the enclosure, instantly suffocating the fire before it spreads outside the DP box.
Modern automatic fire suppression balls and panel-mounted systems are designed to activate in approximately 3–5 seconds after direct flame exposure, making them highly effective for early-stage electrical fire control.
⚡ Why Fire Starts Inside DP Boxes
DP boxes and electrical panels contain:
MCB breakers
Main switches
Bus bars
Copper terminals
Heavy wiring joints
Contactors
Relays
Changeover systems
Due to:
loose wiring,
high current load,
voltage fluctuation,
overheating,
insulation damage,
dust accumulation,
moisture,
or short circuit sparks,
these components can suddenly ignite.
Because the fire starts inside a sealed metal enclosure, users usually notice the fire only after smoke starts coming out — and by then expensive wiring, breakers, connected appliances, or even the whole building may already be at risk.
That is why automatic enclosed fire extinguishing technology is becoming essential for modern electrical safety systems.
💥 Fully Automatic Burst Activation Technology
This extinguisher is not a manual spray type cylinder.
It is a self-triggering burst fire suppression capsule installed directly inside or above the DP box.
Working Mechanism:
As soon as:
temperature crosses the critical danger level, or
direct flame touches the extinguisher body,
the sealed pressure chamber activates automatically.
Within seconds, the extinguisher:
✔ bursts open automatically
and
✔ discharges concentrated CO2 gas at high pressure
throughout the electrical enclosure.
The sudden gas flooding immediately:
cuts oxygen supply,
suppresses flame,
cools overheated components,
stops electrical arc continuation,
and prevents fire from spreading.
CO2 based suppression is especially suitable for electrical fires because it is non-conductive, fast acting, and does not require water contact.